iMEG Generator 1 Mega Watt


iMEG 5000 KW (5MW) –  Magnetic Energy Generator


Magnetic Energy Generator Datasheet

The iCRE8 Power Generation System is a packaged
turnkey solution for iMEG Generator and
iENERGY Distribution System.
 iMEG Generator is a stand-alone electrical
generator based on the proprietary magnetic
transducer technology. It is capable of generating
electrical power by itself, no external input power
required, thus no fuel cost. Rotation of the
iMEG Generator is kick started by the internal

battery powered starter; self sustained its rotation
and increases its speed by magnetic force to
generate electrical power.

 The iMEG Power Generation System is
configured as a building block modular system that
makes it scalable and easy to deploy.
 The Generator System is a packaged turnkey
solution that can be configured for various size of
installation and environment; Standalone, OFF-Grid
or ON-Grid. It is equipped with various functions
such as Control, Protection, and Monitoring.
 iENERGY Power Distributor is designed and
customized as necessary to connect with the local
Grid and environment.
 Output Power Capacity, 500 MWh / 625 MVA
 Max Configurable Power, 500 MWh / 625 MVA
 Nominal Output Voltage, 480V 3PH
 Output Voltage Distortion, Less than 5% at full load
 Output Frequency (sync to mains), 50 Hz –
programmable +/- 0.5 / 1 / 2 / 4 / 6 / 8%
 Waveform Type, Sine wave
 Output Connections, (1) Hard Wire 4-wire (3PH + G)

15000 Watt 110v <-> 220v 50Hz/60Hz
The AR Series Step Up / Step Down Voltage Converter with
Regulator (Stabilizer) provides a stable source of power for
all major appliances and sensitive electronics. Each model is
CE approved and certified. (Transformer could be adjusted as
Heavy Duty Voltage Converter Regulator
Made For Continuous Use – CE Approved
 15000 Watt max load capacity, Voltage converter plus
Voltage Stabilization, Converts both ways from 220 volt to
110 volt and 110 volt to 220 volt, Safety Cut-Off Function,
Unit requires hardwiring.
 Heavy-duty 2 in 1 step up-down voltage converter and
stabilizer for continuous use
 Up to 15000 watts capacity
 Converts 220/240 volts to regulated 110 volts
 Converts 110 volts to regulated 220/240 volts
 Voltage input range at 220 volt is 180-260 volts and at 110
volt voltage input range is 75-130 volts.
 Single phase 50/60hz frequency.
 Total Area required: 1,700 Square Meters
 Height: 5 Meters
 Weight: 220 tons
 Aluminum structure
 Light grey (NCS 2703-G84Y)
 Foundation: Ten inches reinforced concrete
 Type: KDS1000
 CSA Enclosure Types: 1, 2, 3, 3R, 4, 4X
 Bus: Copper or Aluminum
 Voltage: 635 VAC
 Amperage: 200A – 5000A
 Phasing/Wiring: 3ph-3w or 3ph-4w
 Short-Circuit Rating: 150kA at 635 VAC
 Type Tested: ANSI C37.20.1
 Standards: C22.2 No. 94-2-07, C22.2 No. 31-14, UL No. 1558
 Class: 4641 01, 4641 81


There are no reviews yet.

Be the first to review “iMEG 5 MW”

Your email address will not be published. Required fields are marked *